A conduit bender is a tool used to bend metal conduits, typically made of galvanized steel, into various shapes to fit specific installation needs. Here are the basic steps to use a conduit bender:
Choose the right conduit bender: Make sure you have the right bender size for the conduit you are working with. Conduit benders come in different sizes for different conduit diameters.
Mark the conduit: Use a marker to mark the conduit where you want the bend to start and end. Use a measuring tape to ensure accuracy.
Insert the conduit: Place the conduit in the bender with the starting point of the bend aligned with the arrow on the bender.
Bend the conduit: Using the handle, pull the bender towards you until the conduit reaches the desired angle. Use a level or angle finder to make sure the bend is straight.
Release the conduit: Release the bender handle to release the pressure and remove the conduit from the bender.
Repeat as necessary: If you need to make multiple bends, repeat the process with the appropriate measurements.
Finish the conduit: Once you have made all the necessary bends, deburr the ends of the conduit using a deburring tool and install any necessary fittings.
Remember to always wear protective gear, such as gloves and safety glasses, when using a conduit bender, as the metal can be sharp and the tool requires a lot of force to use.
0 Commentaires